【AICHI TOYOTA KOMAKI-MURANAKA】My tools【English Version】
2026.07.26
本日は
英語版。
ネパール出身
アレ サンジプさんのブログです。
今回は
英語版オンリーです。
辞書を片手に
頑張って読んでみてください。
それではどうぞ！
These photos show a well-organized mechanic’s toolbox. Here are the names of the tools and their common uses.
First Drawer
* Phillips screwdrivers – Tighten or loosen Phillips (cross-head) screws.
* Flat-head screwdrivers – Tighten or loosen slotted screws.
* Stubby screwdrivers (blue and red handles) – Used in tight spaces where a normal screwdriver won’t fit.
* Precision screwdrivers – For very small screws in electrical or delicate work.
* Trim clip removers / fork tools (wooden handles) – Remove door clips, trim panels, and plastic fasteners.
* Scraper / gasket scraper – Removes old gaskets, sealant, paint, or adhesive.
* Diagonal cutting pliers – Cut wire, cable ties, and small pins.
* Needle-nose pliers – Grip, bend, or pull small objects and wires.
* Slip-joint / groove-joint pliers (water pump pliers) – Grip pipes, nuts, and irregular shapes.
* Locking pliers (Vise-Grips) – Clamp tightly onto parts for holding or turning.
* Socket extensions – Extend the reach of a ratchet to access recessed fasteners.
* Ratchet handle – Drives sockets to tighten or loosen nuts and bolts.
* Impact wrench (air/pneumatic) – Quickly removes or installs nuts and bolts using compressed air.
* Cold chisel (blue handle) – Cuts or chips metal.
* Steel ruler – Measures lengths and checks straightness.
* Digital torque adapter (green tool) – Measures applied torque to ensure bolts are tightened to specification.
* Deep sockets (red holders) – Used on long bolts or protruding studs.
Second Drawer
* Combination wrenches (open-end/box-end) – Tighten or loosen hex nuts and bolts.
* Ratcheting combination wrenches – Allow continuous turning without removing the wrench from the fastener.
* Offset ring spanners – Reach nuts and bolts in recessed or obstructed areas.
* Large ring spanners (22 mm, 24 mm, etc.) – For larger fasteners.
* Deep impact sockets – Heavy-duty sockets for use with impact tools.
* Standard sockets – Used with a ratchet for general tightening and loosening.
* Large box-end wrench (left side) – Used on large nuts and fittings.
This toolbox contains the essential hand tools commonly used for automotive maintenance and repair, including engine work, suspension, brakes, electrical repairs, and general mechanical servicing.
AICHI TOYOTA KOMAKI-MURANAKA
Today's blog is brought to you by Ale Sanjip!
英語版。
ネパール出身
アレ サンジプさんのブログです。
今回は
英語版オンリーです。
辞書を片手に
頑張って読んでみてください。
それではどうぞ！
These photos show a well-organized mechanic’s toolbox. Here are the names of the tools and their common uses.
First Drawer
* Phillips screwdrivers – Tighten or loosen Phillips (cross-head) screws.
* Flat-head screwdrivers – Tighten or loosen slotted screws.
* Stubby screwdrivers (blue and red handles) – Used in tight spaces where a normal screwdriver won’t fit.
* Precision screwdrivers – For very small screws in electrical or delicate work.
* Trim clip removers / fork tools (wooden handles) – Remove door clips, trim panels, and plastic fasteners.
* Scraper / gasket scraper – Removes old gaskets, sealant, paint, or adhesive.
* Diagonal cutting pliers – Cut wire, cable ties, and small pins.
* Needle-nose pliers – Grip, bend, or pull small objects and wires.
* Slip-joint / groove-joint pliers (water pump pliers) – Grip pipes, nuts, and irregular shapes.
* Locking pliers (Vise-Grips) – Clamp tightly onto parts for holding or turning.
* Socket extensions – Extend the reach of a ratchet to access recessed fasteners.
* Ratchet handle – Drives sockets to tighten or loosen nuts and bolts.
* Impact wrench (air/pneumatic) – Quickly removes or installs nuts and bolts using compressed air.
* Cold chisel (blue handle) – Cuts or chips metal.
* Steel ruler – Measures lengths and checks straightness.
* Digital torque adapter (green tool) – Measures applied torque to ensure bolts are tightened to specification.
* Deep sockets (red holders) – Used on long bolts or protruding studs.
Second Drawer
* Combination wrenches (open-end/box-end) – Tighten or loosen hex nuts and bolts.
* Ratcheting combination wrenches – Allow continuous turning without removing the wrench from the fastener.
* Offset ring spanners – Reach nuts and bolts in recessed or obstructed areas.
* Large ring spanners (22 mm, 24 mm, etc.) – For larger fasteners.
* Deep impact sockets – Heavy-duty sockets for use with impact tools.
* Standard sockets – Used with a ratchet for general tightening and loosening.
* Large box-end wrench (left side) – Used on large nuts and fittings.
This toolbox contains the essential hand tools commonly used for automotive maintenance and repair, including engine work, suspension, brakes, electrical repairs, and general mechanical servicing.
AICHI TOYOTA KOMAKI-MURANAKA
Today's blog is brought to you by Ale Sanjip!
